Why is my Ozoneair PURIFY PLUS Air Cleaner not starting?
If your Ozoneair Air Cleaner isn't starting, there are a few potential reasons. First, ensure the unit is turned on by pressing the menu button or using the remote. Next, verify that the power cord is securely connected. Finally, check the electrical outlet by trying a different one.
What to do if my Ozoneair PURIFY PLUS has low air flow?
If you're experiencing low airflow with your Ozoneair Air Cleaner, consider these possibilities: * Check the fan: Ensure that nothing is blocking the fan input or output. * Inspect the HEPA filter: If the HEPA filter is full, it will need to be replaced.
Why is there no UV light visible on my Ozoneair Air Cleaner?
If your Ozoneair Air Cleaner starts but the UV light isn't visible, it could be due to the delay function being active. Wait for the delay function to disable, or remove it by pushing and holding the Timer button until the delay symbol disappears. Alternatively, the UV lamps may be consumed and need replacement. When the treatment is running, the menu button is encircled by a blue light.
What to do if the display on my Ozoneair PURIFY PLUS Air Cleaner does not work?
If the display on your Ozoneair Air Cleaner isn't working, it's possible that the product hasn't been activated. Try pushing the menu button to start the product.
Symbols indicating precautions and special procedures for safe operation.
How UV light disrupts microorganism DNA for effective disinfection.
UV light activating a catalyst to create hydroxyl radicals that neutralize pollutants.
Details technical data for GO and PLUS models.
Shows when the air purifier is operating in automatic mode.
Caution against blocking air intake or outlet to prevent shutdown.
Steps for safely removing and installing new UV lamps.
Importance of replacing lamps at end-of-life to prevent breakage.
Procedure for replacing the HEPA filter for optimal cleaning.
Solutions for issues where the product fails to power on.
General| Dimensions | 230 x 160 x 240 mm |
|---|---|
| Power Consumption | 38 W |
| Timer | Yes |
| Filter Type | HEPA, Activated Carbon |
| Coverage Area | Up to 60 m² |
| Weight | 2.3 kg |
To Next Page
