P.I. Engineering RailDriver User Manual

2
Box Contents
As you unpack your RailDriver, please check the enclosed items against
this packing list:
 RailDriver Control Unit
 RailDriver Power Supply (AC adapter)
 RailDriver Label Sheets & Game Button Identification Strips
 RailDriver Operating Manual
Installing Labels for the Controls and Function Keys
Reverser, Throttle, and Brake
decals are applied with the left end
of the label at the top of the control
lever.
To remove wiper and light switch
caps for labeling, insert a thin
bladed screwdriver into the slot on
either side of the switch and
carefully pry up until the switch cap
pops off.
To apply legends for the function keys,
pry up carefully, but with force, on the
panel cover, place the legend strips
above the keys. Insert the top of the
panel cover first, and snap the bottom
back into place.
Printable versions of these legend
strips can also be found on our website.

P.I. Engineering RailDriver Specifications

General

Brand	P.I. Engineering
Model	RailDriver
Category	Controller
Language	English