Stopping Procedure
30
After Each Use
• Examine the blade for damage.
• Clean the machine if necessary, go to page
43 for more information on how to clean your
machine.
Stopping Procedure
STEP 1
Before stopping the machine, you must allow
the engine to idle for 30 seconds.
Release the OPC Lever and the engine will
stop.
CAUTION - The engine and exhaust
will remain hot for a while after use. Ensure
the engine and exhaust have cooled before
carrying out any maintenance or storage.
Before stopping the machine, you must
allow the engine to idle for 30 seconds.
!
STEP 2
Turn the key to the OFF position.
WARNING - After you stop the engine,
the blade is still in motion for a short period
of time.
!
To Next Page
Loading...