Paasche Airbrush HG-08A User Manual

INSTRUCTION MANUAL
HG-08A HVLP SPRAY GUN
INSTRUCTION MANUAL HG-08A 11-5-2018
Description:
HG- Manual Spray Guns are for use
from Low to Medium Pressure with
Light to Medium. They will cover a
range of materials to include enamels,
latex, lacquers, acrylics etc. These
Models require 2 to 4 C.F.M. at 20-
40 lbs. Air Pressure depending on
thickness of Material being sprayed.
Tip and needle are made of Stainless
Steel and can handle water or solvent
based materials.
Specication:
Part Number:
Type:
Head Size:
HG-08A
HVLP Gravi
ty Feed
.8mm (Optional sizes .5mm & 1mm)
Air Volume: 2-4 CFM
Air Pressure: 20-40 PSI
Air Inlet: ¼” NPT thread
Cup size: 3 oz (27SC) - (Optional 8oz (28SC)
Spray Pattern: 1” to 7”
Weight: .90 Lbs
Finish: Blue / Silver
Setup:
1. Blow out all airline hoses before connecting to the spray gun
to remove foreign particles.
2. Connect air hose to air inlet tting.
3. Connect uid cup or uid hose to uid inlet.
4. Tighten all hose connections securely.
5. Adjust air pressure to required amount at the regulator.
6. Adjust uid volume by turning the uid control knob.
7. The Fan pattern is controlled by turning the fan control Knob
8. Test spray on some cardboard or news paper for nal
adjustment before spraying your project.
Paasche Airbrush Company
9511 58th Place
Kenosha, WI 53144
Ph: 773-867-9191 • Fax: 773-867-9198
Website: www.paascheairbrush.com
E-Mail: info@paascheairbrush.com

Paasche Airbrush HG-08A Specifications

General

Brand	Paasche Airbrush
Model	HG-08A
Category	Paint Sprayer
Language	English

Summary

HG-08A HVLP Spray Gun Introduction

Product Description

Details the features and applications of the HG-08A HVLP spray gun for various materials.

Technical Specifications

Lists key technical data including air volume, pressure, nozzle sizes, and weight.

Setup Guide

Provides step-by-step instructions for connecting and preparing the spray gun for operation.

Spray Gun Operation and Maintenance

Cleaning Procedure

Instructions for cleaning the spray gun after use to maintain performance and prevent damage.

Diagram and Spare Parts

Illustrates the spray gun components and lists available spare parts for replacement.

Safety Precautions

Hazard Identification and Safeguards

Details potential hazards (fire, toxic exposure, incompatible materials) and recommended safety measures.

Troubleshooting Guide

Spray Pattern Issues

Addresses common spray pattern defects like heavy patterns, split spray, and jerky spray with causes and fixes.

Operational and Leaking Problems

Covers issues such as no spray, paint bubbles, and fluid leaks with corrective actions.

Finish Quality Problems

Details solutions for common finish defects like runs, sags, and orange peel.