Pace Technologies NANO 2000T - Technical Specifications

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲ INSTRUCTION MANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: http://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
NANO 2000T Polisher
1.2 Technical Specifications
Electrical specifications: 110 / 220V (50/60 Hz) (single phase
input - motor runs on 3-phase power
for more torque)
Working wheel: 8-inch (200 mm) or
10-inch (250 mm) diameter
Motor power: 1 hp (750 hp)
Polishing base speed: 0 to 1000 rpm variable speed (20
rpm increments). Fast speed
buttons pre-programmed for 100,
200 and 300 rpm)
Weight: Approx. 150 lbs (70 kg)
Dimensions (WxHxD): Approx. 30” x 13” x 28”
(760 mm x 330 mm x 710 mm)
Working temperature: 32° - 100°F (0 - 40°C)
Shipping temperature: 32° - 100°F (0 - 40°C)
Storage temperature: 32° - 100°F (0 - 40°C)
Maximum part size 1/3-diameter of working wheel
2
EU Directives: Machinery directive 2006/42/EC
Low Voltage Directive 2006/95/EC
Electromagnetic Compatibility directive 2004/108/EC
EU Harmonized Standards: EN ISO 1200:2010
EN 61010-1:2010
EN 61326-1:2006