High-Definition Digital Transport Adapter
The Pace DC60Xu HD DTA is an ultra-compact, low cost adaptor that converts broadcast
MPEG-2 and MPEG-4 Standard-Definition and High-Definition QAM to a digital HDMI™ and
an analogue RF output.
This provides a cost-effective and secure way for cable operators to transition to digital by enabling
the viewing of digital programming on HDMI-equipped TV sets.
A virtual analog cable experience is provided with simple channel up/down and direct channel entry.
All messaging to the DTA is carried in-band, one way, with no return path.
The DC60Xu supports standards-based DVB-CSA, DES-ECB, and SCTE 52 field-selectable modes
for content decryption.
A download of content protection software is required to activate content security.
Summary
• All Digital for use in Digital Migrations
• Advanced User Interface
• In-band only
• Simple channel up/down plus numbers on
the remote control
Data Sheet DC60Xu
To Next Page
RF Interfaces
