-36-
Troubleshooting
1. Turn the keyswitch off, and then back on again.
2. Some styles have a visible circuit breaker. It is located on
the black controller housing near the chrome seat post (See
FIGURE 14). You will not see any white on the button when
it is switched in the correct operating position. Also check to
see that all of the wires are securely attached to the box.
3. Check the motor plug for proper connection.
4. Check the battery plug for proper connections.
5. Check the BATTERY indicator for discharged batteries.
6. Check that the Brake Disengage Mechanism is pushed all the way down.
7. Turn the keyswitch off, and then back on again.
8. If the scooter still will not move, consult the list of diagnostic codes on the next page. If
they do not lead you to the source of the problem, contact your dealer.
FIGURE 14
To Next Page
Loading...