EasyManua.ls Logo

PaceSaver Plus III series - Page 27

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-25-
5. An extension cord is not recommended for use with this equipment. Use of an improperly
rated extension cord could result in risk of re or electrical shock. Should it be required to
use an extension cord, make certain that it is of 3-wire construction and has a wire size of at
least 16-gage, and the cord must be in good electrical condition.
6. Do not operate this charger with damaged AC cord or receptacle. If they are damaged,
replace them immediately.
7. Do not disassemble the charger. If there is a perceived problem with the equipment,
refer to the servicing section of this manual or refer to a quali ed technician for service.
Incorrect assembly of the charger could result in a risk of electrical shock or re.
8. Do not operate the charger if it has received an impact of a severity that may render it
inoperative. Take it to a service technician.
9. To reduce the risk of electrical shock, unplug the charger from the electrical outlet be-
fore attempting any maintenance or cleaning.
10. Operate the charger on a at surface. Restricting air ow around the charger can create
an overheated condition. Carpeted oors can restrict air ow. It is normal for the charger
to operate at a high temperature.
11. Do not operate the charger with a damaged cord or plug. Do not operate if the charger
looks like it has been damaged. Contact your dealer for repair.
12. Make sure the charging plug is seated fully in the scooter battery charger outlet.
13. Do not stand on wet surface while connecting charger.
Before Charging:
1. Verify that battery terminals are clean and that all charger connections are secure and in
good condition.
2. Verify that all cords and cables are in good condition.
Grounding and AC Power Connection:
The charger must be plugged into a grounded electrical outlet. The unit is provided with
an electrical cord which contains a conductor for grounding. The charger cord must be
plugged into an AC outlet that is properly installed, and is grounded in accordance with the
National Electrical Code and all local electrical codes and ordinances.
!! CAUTION !! - Failure to plug the charger into a grounded receptacle could cause a
condition allowing an electrical shock hazard to be present while charging.
++DANGER++ Improper connection of the equipment grounding conductor can result
in a risk of electrical shock
!! CAUTION !! - Never alter the AC cord or plug provided with this equipment. If it does
not t the outlet, have a properly grounded outlet installed by a quali ed electrician.

Related product manuals