Pachanko Labs User Manual (English) 16
POWERING-ON YOUR CONSTELLATION MUSIC SERVER (Power cycle
routine)
For the Constellation Mini and Mini SE models, just press the Power button on the front panel*.
For the Constellation Reference, SE and Masterpiece models please switch on the Power supply first and wait for
a “click” sound (Power supplies are equipped with a Soft Start).
Power on: Switch on the CONSTELLATION*, a white LED will illuminate. Wait for up to 25 seconds to allow for the
Operating System and Software fully boot.
Power off: Press then release the power button and wait until the white led turns off.
* If you are using the Pachanko Stellar or any other Linear Power supply, you must switch the Linear Power Supply
unit on first.
To Next Page
Loading...