PACIFIC CYCLE Frozen Toddler Quad KT1167

Questions and Answers

A
Anna GallegosAug 7, 2025
Why is my PACIFIC CYCLE Frozen Toddler Quad KT1167 Toy vehicle not running?
- C
  comptoncarmenAug 7, 2025
  If your PACIFIC CYCLE Toy vehicle isn't running, several factors could be at play. First, ensure the battery connectors are firmly plugged into each other. If wires around the motor seem loose, contact Consumer Relations at 877-741-6154 for an authorized service center. Also, check and tighten any loose wheel nuts. If the thermal fuse has tripped, allow the vehicle to rest for 5 to 10 minutes. If the battery is low, recharge it. If the battery is dead, replace it. For damage to the electrical system or motor, contact Consumer Relations at 877-741-6154 for an authorized service center.
S
Steven DayAug 11, 2025
What to do if PACIFIC CYCLE Frozen Toddler Quad KT1167 Toy vehicle runs sluggishly or beeping occurs?
- H
  hpageAug 11, 2025
  If your PACIFIC CYCLE Toy vehicle runs sluggishly or beeps, it could be due to several reasons. A low battery could be the cause, so recharge it. An old battery might also be the problem, in which case, replace it. Additionally, the vehicle might be overloaded, so reduce the weight it's carrying. Using the vehicle in harsh conditions can also cause this issue; operate it on level ground and firm surfaces.
M
Michael HooverAug 17, 2025
Why PACIFIC CYCLE Toy vehicle does not run very long?
- A
  Amanda RamosAug 17, 2025
  If your PACIFIC CYCLE Toy vehicle doesn't run very long, it might be due to an undercharged or old battery. Ensure the battery connectors are firmly plugged in when recharging. If the battery is old, consider replacing it.
M
mariocooperAug 21, 2025
What to do if PACIFIC CYCLE Toy vehicle needs a push to go forward?
- T
  Theresa HurstAug 21, 2025
  If your PACIFIC CYCLE Toy vehicle needs a push to go forward, the issue might stem from poor contact of wires or connectors. Check that the battery connectors are firmly plugged into each other. If wires are loose around the motor, or if there is a dead spot on the motor, call Consumer Relations at 877-741-6154 for an authorized service center.
C
cbellAug 27, 2025
How to fix a 6V battery that will not recharge on PACIFIC CYCLE Frozen Toddler Quad KT1167 Toy?
- A
  Andres WilkinsonAug 27, 2025
  If your 6V battery for the PACIFIC CYCLE Toy will not recharge, start by checking that the battery connector and adapter connector are firmly plugged into each other. Also, ensure the battery charger is plugged into a working wall outlet. If the charger is not working (lights not glowing), call Consumer Relations at 877-741-6154 for an authorized service center.
L
lgarciaAug 31, 2025
What to do if PACIFIC CYCLE Frozen Toddler Quad KT1167 makes loud grinding or clicking noises?
- A
  Alice ColeSep 1, 2025
  If you hear loud grinding or clicking noises coming from the motor or gearbox of your PACIFIC CYCLE Toy vehicle, call Consumer Relations at 877-741-6154 for an authorized service center.

Summary

Safety

Battery Warnings

User Requirements

Assembly

Attach the headlights

Attach the headlights to the toddler Quad body using screws.

Attach the Steering Rod and Handlebars

Connect the steering rod and handlebars to the car body with provided hardware.

Attach the Front Wheels

Installing the Rear Axle

Attach the Rear Wheels

Connect the Battery to the Motor

Connect the red battery connectors in the battery compartment.

Attach the Seat

Charge the Battery

Connect the charger to the quad and a wall outlet for initial charging.

Using the Toddler Quad

Operating the Toddler Quad

Re-Charge Interval and Time

Battery Replacement and Disposal

Maintenance

Troubleshooting Guide

Warranty

PACIFIC CYCLE Frozen Toddler Quad KT1167 Specifications

General

Model Number	KT1167
Weight Capacity	44 lbs
Material	Plastic
Theme	Frozen
Number of Wheels	4
Category	Toy
Product Type	Ride-on
Color	Blue
Product Name	PACIFIC CYCLE Frozen Toddler Quad