Need help?Do you have a question about the Pacific Power Source AMX Series and is the answer not in the manual?
Guide on how to effectively use the operation manual for AMX-Series Power Source.
Critical safety warnings and precautions for operating AMX-Series Power Sources.
Details on various AMX-Series power source models, ratings, and capabilities.
Technical electrical details including input power, output power, and performance.
Specifies input voltage and current requirements for AMX-Series models.
Details on output voltage, current ratings, and overload operation.
Covers power factor, frequency, distortion, and load regulation.
Details on bandwidth, transient response, DC offset, and protection.
Physical dimensions, weight, and mounting details for AMX-Series units.
Instructions on how to connect the AC input power to the unit.
Operating temperature range, cooling methods, and thermal protection.
Guidelines for selecting a location and safely moving the power source unit.
Steps to configure the desired output voltage ranges for different models.
How to set input voltage configurations based on model and jumpers.
Specifications for wire types and sizes for power input connections.
Instructions for connecting loads to the unit's output terminals.
Wiring procedures for split-phase load connections.
Wiring procedures for three-phase load connections.
Important notes and considerations when using transformer-coupled outputs.
How to connect multiple units for higher power output.
Information on connecting external controllers via GPIB or RS-232.
Connecting auxiliary input/output signals for synchronization and modulation.
Connecting external sense leads to measure output voltage accurately.
Description and function of controls and indicators on the front panel.
Step-by-step guide for the first-time startup of the power source.
Standard procedure for turning the system on during normal operation.
Steps for safely shutting down the AMX-Series power source.
Conditions causing shutdown and procedures for resetting faults.
Explanation of different output configurations and system architectures.
Schedule and tasks for performing routine maintenance on the units.
Information on when to calibrate and the required test equipment.
Detailed steps for calibrating the power source and its controller.
Procedure to verify output capability and metering accuracy under load.
How to obtain service and contact Pacific Power Source.
List of factory part numbers for major system components.
Detailed factory part numbers for sub-assemblies and chassis components.
Specific part numbers for the Model 105-AMX unit.
Specific part numbers for the Model 108-AMX unit.
Specific part numbers for the Model 112-AMX unit.
Specific part numbers for the Model 125-AMX unit.
Specific part numbers for the Model 140-AMX unit.
Specific part numbers for the Model 160-AMX unit.
Specific part numbers for the Model 305-AMX unit.
Specific part numbers for the Model 308-AMX unit.
Specific part numbers for the Model 312-AMX unit.
Specific part numbers for the Model 320-AMX unit.
Specific part numbers for the Model 345-AMX unit.
Specific part numbers for the Model 360-AMX unit.
Specific part numbers for the Model 390-AMX unit.
Specific part numbers for the Model 3120-AMX unit.
General| Brand | Pacific Power Source |
|---|---|
| Model | AMX Series |
| Category | AC Power Distribution |
| Language | English |
To Next Page
