Need help?Do you have a question about the Pacific Power Source 308-AMX and is the answer not in the manual?
Crucial safety warnings and precautions for operating the equipment.
Power ratings, output voltage ranges, and current capabilities.
Location and mounting guidelines for the power source chassis.
Setting input voltage for specific lower capacity models.
Wiring requirements for single-phase load connections.
Wiring requirements for split-phase load connections.
Wiring requirements for three-phase load connections.
Description of the unit's controls and indicators on the front panel.
Recommended procedure for the first-time startup of the power source.
Steps for verifying system gains and output power capability.
Verifying the power source's ability to deliver rated load.
General| Output Voltage | 0-135/0-270 VAC |
|---|---|
| Output Frequency | 45 Hz to 500 Hz |
| Input Frequency | 47-63 Hz |
| Frequency Regulation | ±0.01% of setpoint |
| Cooling | Forced air |
| Storage Temperature | -20°C to 70°C |
| Humidity | 0 to 95% non-condensing |
| Communication Interface | RS-232, GPIB (optional) |
| Protection Features | Overvoltage, overcurrent, overtemperature |
To Next Page
