SECTION 2 SPECIFICATIONS
32
2.2 MECHANICAL SPECIFICATIONS
This paragraph describes the mechanical characteristics of the AMX-Series Power Sources.
2.2.1 DIMENSIONS
POWER SOURCE:
Dimensions of the AMX-Series Power Sources are listed below.
MODEL 105-AMX
Height: 5.25" [134 mm]
Width: 19.00" [483 mm] (front panel); 16.75" [426 mm] (chassis)
Depth: 23.00" [584 mm] (measured from back side of front panel, excludes terminal blocks)
Weight: 70 lbs. [32 kg] (w/o output transformers);
97 lbs. [44 kg] (with output transformers)
Refer to Figure 2.2.1 for the outline drawing of the Model 105-AMX.
MODEL 108-AMX
Height: 5.25" [134 mm]
Width:
19.00" [483 mm] (front panel); 16.75" [426 mm] (chassis)
Depth: 23.00" [584 mm] (measured from back side of front panel, excludes terminal blocks)
Weight: 70 lbs. [32 kg] (w/o output transformers);
97 lbs. [44 kg] (with output transformers)
Refer to Figure 2.2.1 for the outline drawing of the Model 108-AMX.
MODEL 112-AMX
Height: 5.25" [134 mm]
Width: 19.00" [483 mm] (front panel); 16.75" [426 mm] (chassis)
Depth: 23.00" [584 mm] (measured from back side of front panel, excludes terminal blocks)
Weight: 80 lbs. [36 kg]
Refer to Figure 2.2.1 for the outline drawing of the Model 112-AMX.
MODEL 125-AMX
Height: 10.50" [267 mm]
Width: 19.00" [483 mm] (front panel); 17.00" [432 mm] (chassis)
Depth: 23.50" [597 mm]
Weight: 120 lbs. [54 kg]
Refer to Figure 2.2.3 for the outline drawing of the Model 125-AMX.
To Next Page
Loading...
