ill
Use & Functions
of
Buttons:
A.
"On/Off
Button"
l.When
the
On/Off
Button is pressed the first time, The motor will be high speed
turned on the high speed indicators will be on
at
the same time.
2.When the
On/Off
Button is pressed the second time, The motor will be low speed
control the low speed indicator will be on.
3. When the
On/Off
Button is pressed the third time,
The
motor will be turned off.
All the indicators will be off. Continuous operation should follow the above order.
B. "Delay
Off'
Button
1. The
"Delay
Off'
Button provides 4 time delay periods for selection with simple
operation. The 4 time delay periods are 5 minutes,lO minutes,
15
minutes, and
20
minutes.
2. When the .
"Delay
Off'
Button
is
pressed to set the delay time, the left and right
motors will be turned on simultaneously. The indicators will be turned on
sequcntially, When the time selected
is
up, the motors will stop automatically. The
indicator goes off.
3. When the
"Delay
Off'
Button
is
pressed, the delay time can be selected in
sequential order:5 minutes-+ 10 minutes-+
15
mintes-+20 minutes-+off.
C. "Lamp" Button
The light
of
the cookerhood will be turned on by pressing the "Lamp" Button and
off
by pressing the "Lamp" Button again.
D. "Auto Clean" Button
I. The automatic cleaning programme starts whilst the "Auto Clean" Button
is
turned
on. The "L" and "R" indicators will be on simultaneously.
2.
The automatic cleaning programme operates in the sequential order as follows:
the motors operate without cleaner for 3 seconds
-+
cleaner will be injected for
10 seconds
-+
the motors will revolve for
25
seconds
-+
cleaning program finishes
and stops automatically.
-2-
To Next Page
Loading...
