8
Before First Use
1. Check that all accessories are
complete and the unit is not
damaged.
2. Add water into water tank to the
“MAX” level and brew water several
times without ground coee, to
remove any residue left from the
manufacturing process.
3. Discard water.
4. Clean all detachable parts
thoroughly with warm water.
Initial Set Up
1. Plug the power cord into the outlet.
The display screen will briely
display all the icons.
2. Click and hold the dial for 2
seconds to enter into the “Clock
Setting” mode. Rotate the dial to
adjust the “Hour”. To increase the
“Hour”, rotate the dial clockwise,
to decrease the “Hour”, rotate the
dial counterclockwise. After setting
the “Hour”, click the dial to conirm.
Note: The time cycle is 12 hours.
3. Rotate the dial to adjust “Minutes”
using the same process as previous
step. Click dial to conirm, as shown
in Fig. 1.
Using Your Coee Maker
Fig. 1
Click + H
TR1700026_A.indd 8 9/25/19 7:44 AM