PageFlip Lite User Guide 4.8 Loading Pages into Arms
(a) (b)
(c) (d)
Figure 11: (a) Release sheets from under page restraint; (b) lift corner of
topmost page and feed it into forked-arm slot; (c) slide page
into slot and flatten; (d) turn page and repeat process.
to stay open and to guarantee that only one page will be turned at
a time. Please visit www.pageflip.com for videos.
Method 2 loads the pages in reverse order, i.e., the last page
to be turned is the first to be loaded. The last sheet is slid under
all of the forked arms until it reaches the arm furthest from the
center. Then, we weave that sheet through the slot of that last
arm. Repeat this weaving process for the remaining sheets, as
shown in Fig. 12.
PageFlip, Inc. 21 www.pageflip.com
To Next Page
Loading...