Copyright © 2009 Pahlén AB, Box 728, SE-194 27 Upplands Väsby, Sweden
Tel. +46 8 594 110 50, Fax +46 8 590 868 80, e-mail: info@pahlen.se, www.pahlen.com
Product description
!"#$%&'()*(#(+&#,(&'-+#./&0(#1#)2#32&().(,45(1&0*)5.*6( %(7(#(+&#,(&'-+#./&0().(*,#.8#08(-5.9/"0#,)5.:(#.8( %$;<($(#(+&#,(
exchanger equipped with an electronic control unit and circulation pump for the primary circuit.
All Aqua-Mex variants can be ordered with an interior coil of either titanium or stainless acid-resistant steel.
The titanium version (T) is intended for use in aggressive water conditions, salt water and in pools with a chlorinator.
=+&( !"#$%&'(+&#,(&'-+#./&0(>&#,"0&*(*,0#)/+,$,+05"/+(?54(#.8(@A(-5..&-,)5.*:(-5.,0)3",)./(,5(+)/+(?54(#.8(254&0(&.&0/B(
consumption.
Aqua-Mex heat exchanger
ENGLISH 1
Installation instruction
MA40-12E
2011
!"#$%"&'()*!"%+"&,%-$)
Fully equipped Aqua-Mex FE Standard Aqua-Mex
A complete heat exchanger with electronic control of temperature
#.8(?54C(D,(>&#,"0&*(#.(&2&-,05.)-(?54(*4),-+(,+#,(*+",*(5>>(,+&(+&#,(
&'-+#./&0()>(4#,&0(?54(*,5E*C(
A high-quality circulation pump drives the primary circuit.
Capacity: 40 or 70kW.
The Aqua-Mex FE is protected from dust and water as per protection
class IP44, for installation either indoors our outdoors.
Aqua-Mex FE is CE-approved.
A complete heat exchanger with connections to the
primary and secondary water circuits.
Capacity: 40, 70 or 100kW.
Dimensions
L770xB140xH346 mm Dimensions AM 40 & AM 70
Dimensions AM 100
L770xB137xH178 mm
L942xB137xH178 mm
Weight AM-FE 40T 8,4 kg
AM-FE 40 9,1 kg
AM-FE 70T 8,8 kg
AM-FE 70 9,7 kg
Weight AM 40T 4,4 kg
AM 40 5,1 kg
AM 70T 4,8 kg
AM 70 5,7 kg
AM 100T 5,3 kg
AM 100 7,4 kg
Max primary circuit temperature 90ºC Max primary circuit temp. 90ºC
Max secondary circuit temperature 45ºC Max secondary circuit temp. 45ºC
%).)F"F(?54:(*&-5.8#0B(-)0-"), 90 litres/min %).)F"F(?54:(*&-5.8#0B(-)0-"), 90 litres/min
Pressure, primary circuit
0,3 - 6 bar Pressure, primary circuit max 6 bar
Pressure, secondary circuit max 4 bar Pressure, secondary circuit max 4 bar
Connection, primary circuit GHA Connection, primary circuit GHA
Connection, secondary circuit @A(IJK(FFL Connection, secondary circuit @A(IJK(FFL
Ambient temp. during operation +5 to +40 ºC
Protection class IP44
Voltage 220-240V 1~N 50/60 Hz
Current rating 0,5 A
Power consumption 96 W
Performance, heat exchanger
Primary Secondary
DT 60ºC *
Typ (T = with titanium coil) l/min m
3
/h H(m) l/min m
3
/h H(m) kW
AM 40, AM-FE 40 20 1,2 0,6 250 15 0,4 40
AM 40T, AM-FE 40T 20 1,2 0,4 250 15 0,4 40
AM 70, AM-FE 70 30 1,8 1,6 300 18 0,6 70
AM 70T, AM-FE 70T 30 1,8 1,4 300 18 0,6 70
AM 100 40 2,4 2,6 333 20 0,8 100
AM 100T 40 2,4 2,3 333 20 0,8 100
* The nominal heating output based on the temperature difference between incoming warm and cold medium (here 80-20=60°C).
To Next Page
General
