Paingone Plus - Technical Specifications; Product Description and Classification; Product Specifications; Environmental Conditions

13
Technical Informaon
Descripon: Hand-held low-frequency electrical smulator
Device Name: Paingone Plus
Classicaon: Class IIa Medical Device (CE 0086)
Applicaons: Paingone Plus is designed for pain relief via
TENS therapy
Product Specicaon
Dimensions: 149mm in length x 40mm in width.
Energy Output: 2.4 mJ at 1000Ω
Output voltage in air: 32KV max peak
Output voltage on skin (1000Ω): 660V max peak
(or 600 ± 10%)
Pulse length: 40μs ± 20% on 1000Ω
Frequency: 2.5Hz ± 20%
Power Requirements: 1x AAA Baery
Operang Life: One AAA baery can provide
Approximately 800 applicaons. This represents
about 8 months’ use, based on 3 applicaons per
day
Expected Life Cycle: 24 months
Maintenance: Paingone Plus does not require sterilizaon
or disinfecon. Paingone Plus may be cleaned externally
using a so slightly damp cloth.
Electromagnec Compability: Paingone is a medical
device; its operaon does not aect,
and is not aected by, other electrical equipment.
Environmental condions of transport and storage:
-20°C + 5°C
+5°C to 35°C at a relave humidity up to 90%, non
condensing;
> 35°C to 50°C at a water vapour pressure up to 50 hPa.
Environmental condions during use:
-20°C + 40°C
Maximum relave humidity of 70%;
Pressure Range: 700 hPa to 1,060 hPa.
Baery direcon