4
Inserting the battery
Your Paingone Plus comes supplied with 1x
AAA battery. The battery is located in the
foam layer underneath the device.
Remove the battery cover on the device
(2) by twisting it anti-clockwise. Insert the
battery with the positive (+) tip going in rst.
If the battery is inserted incorrectly the
device will not work.
Replace the battery cover, twisting it gently
in a clockwise direction until it is rmly
secured.
Your Paingone Plus is now ready to use
Applying Paingone Plus
Hold Paingone Plus in your hand and rmly
wrap your ngers around the metal contact
plate (3)
Now place the tip (4) of the device directly
on the point you wish to use it. Press and
hold the Power Button (1) for 30 seconds.
Paingone Plus will emit controlled electrical
pulses. You may feel these pulses against
your skin, although some people do not feel
anything.
To Next Page
Loading...