Pakedge Device & Software RK-1 - Installing the RK-1

5
You will nd a description of the interfaces on the back of the RK-1 in Table 2.
Table 2: Interface Explanation (From Left to Right)
Interface Type Speed Protocol Descripon
Reset Buon N/A N/A N/A
Hold Reset Buon for 10 seconds to
factory default the sengs
USB 1 - 2 USB-A 5Gbps USB 3.0 USB port used for le sharing
WAN 1 - 2 RJ-45
10/100/1000
Mbps
Ethernet
WAN port used for the Internet
connecon from the ISP
LAN (Ports 1-5) RJ-45
10/100/1000
Mbps
Ethernet
5-port switch connecons on the
internal network
Console RJ-45 115200 Console Console port for maintenance use
AC Power input AC N/A N/A Power Input
Power Switch N/A N/A N/A On/O Power Switch