Need help?Do you have a question about the Pakedge Device & Software RK-1 and is the answer not in the manual?
General| Model | RK-1 |
|---|---|
| Category | Network Router |
| Managed | Yes |
| Power over Ethernet (PoE) | No |
| Fanless Design | Yes |
| Weight | 2.2 lbs |
| Ports | 1x WAN, 4x LAN |
| Security | Firewall, VPN |
| Mounting | Rack Mountable |
| Operating Temperature | 0°C to 40°C |
| Humidity | 5% to 90% non-condensing |
| Management | Web-based |
Overview of IP networking for AV/control systems and the RK-1's role.
Contact information and support resources for Pakedge products.
Details of package contents, front panel LEDs, and rear panel interfaces.
Steps to access the router's GUI and configure internet connections (DHCP, Static IP, PPPoE).
Allows services inside the network to be available from the internet.
Configuring VLANs to separate devices and increase network efficiency.
Viewing port status, LAN/WAN statistics, and live connection sessions.
Changing the LAN IP address and configuring DHCP server settings.
Manual forwarding of traffic to unknown networks.
Assigning a consistent IP address to a specific device.
Creating and managing policies to prioritize network traffic.
Setting up Pakedge and non-Pakedge DDNS services.
Accessing USB drive contents locally and remotely.
Configuring the RK-1 to act as a media server.
Guide to mapping network drives on Mac OS X, Windows 7, 8/10, and XP.
Setting up the RK-1 as a VPN server and managing users.
Changing admin credentials and using diagnostic tools (Ping, Traceroute, NSlookup).
Settings for remote access, time zone, and configuration backup/restore.
Procedures for updating firmware and rebooting the router.
Technical details on ports, LEDs, protocols, and environmental conditions.
To Next Page
