7
Accessing the Router
To access the router’s GUI, please follow the steps below:
1. Plug an Ethernet cable from the router to a PC.
2. Make sure your network card is set to obtain an IP address automatically. Then open any internet
browser and go to the address http://192.168.1.99
or you can simply type pakedgerouter.com
Note: For best results we recommend using Mozilla Firefox as your web browser. If you are using
Internet Explorer please use version 9 or newer.
3. Enter the default username pakedge and the password pakedger. Click login.
It is recommended that you change this default password. Please see the section titled
“Username/Password”.
Dashboard
The dashboard provides frequently used quick links to help with more efficient set up.
To Next Page
Loading...
