14
2. As an example we will forward TCP port 80 to an IP camera on the IP address
192.168.1.50. Click Add New Item.
3. For the Description enter IP Camera. For the Protocol select TCP. For the WAN Zone
select WAN. We will enter 80 for the External Port. Enter 80 as the Internal port. For
the internal IP address select custom and enter 192.168.1.50. Leave the enable box
checked. Click Apply. The Port forward information will be saved in this section.
Real-Time Monitoring
The Real-Time Monitoring section allows you to view statistics on the router.
The Port Status section will display which ports on the router are currently active.
The LAN/WAN Statistics will display the amount of traffic going through the LAN or WAN of the router.
To Next Page
Loading...
