Need help?Do you have a question about the Pakedge Device & Software X-Series and is the answer not in the manual?
General| VPN Support | Yes |
|---|---|
| Firewall | Yes |
| QoS | Yes |
| VLAN Support | Yes |
| Ports | Varies by model |
| Wireless | No (Wired Routers) |
| Management | Web-based |
Steps for physically setting up the switch, including rack mounting and connections.
Procedure to modify the switch's IP address via the web interface.
How to configure a static route for the default gateway.
Connecting to the switch via console port using specified serial settings (Baud Rate, Data Bits, etc.).
Steps to reset the switch's IP address using console commands (enable, conf t, interface vlan1).
Steps to revert the switch to factory default settings using console commands (delete startup-config, reset).
Information for obtaining technical assistance and troubleshooting the X-Series switches.
To Next Page
