22
7. Towards the bottom you will see the DHCP server settings for VLAN2. We will change the
Start IP address to 192.168.12.100 and the End IP address to 192.168.12.249 so that it
matches the new IP scheme.
8. The Lease time field allows you to view/modify DHCP IP address lease time. The following
format must be used: A D represents days, an H represents hours and an M represents
minutes. For example, if you wanted to change the lease time to be 3 days 2 hours and 30
minutes you would set the lease time to 3D2H30M.
Static Route
Static Routes allow the manual forwarding of traffic to networks that are not a part of the RK-1 internal
routable networks. To create a Static Route, take the following steps.
1. Click Static Route
To Next Page
Loading...
