17
Virtual DMZ
The Virtual DMZ will allow you to place a device in the network outside of the firewall. This will allow for
unrestricted access to it from the internet. To configure the Virtual DMZ take the following steps.
1. Click on Virtual DMZ.
2. Check the enable box. For the DMZ computer’s IP field, you can select the device from
the drop down menu. If the device is not listed you can select custom to manually enter
the IP address of the device you would like to place in the DMZ. Click Apply to finalize
the configuration.
Note: When you enable the Virtual DMZ you will still be able access the routers GUI
remotely via HTTPS, and you will still be able to use the VPN feature.
Changing the IP address of the LAN Zone
The default IP address of the RK-1 is 192.168.1.99. If you need to change the IP address of the router or
change the entire network address take the following steps.
To Next Page
Loading...
