25
Quality of service
Quality of Service (QoS) allows you to prioritize data on the network. For example, there are certain
applications which require the least amount of latency possible. You can prioritize this type of traffic so that
it is sent ahead of other data that can function properly with some latency, such as ordinary web traffic. To
configure QoS take the following steps.
1. Click Quality of Service.
2. Check Enable.
3. You can restrict download and upload speeds on this page. For example, in the following
image we have set 25 Mbps as the limit for download and 10 Mbps as the limit for
upload speeds. This setting will apply to all devices on the network.
To Next Page
Loading...
