Pakedge Device & Software RK-1 - QoS Policy Management

26
4. If you want to create a new QoS policy to prioritize certain data, click Add New Item.
5. The Priority column allows you to select the priority of the data
6. The Source host column allows you to define which source IP address the policy will
apply to. If you select all, the policy will apply to all devices on the network. If your
device is listed in the drop down menu you can select it, otherwise select custom and
manually enter the IP address.
7. The Destination host column allows you to define which IP destination address the
policy will apply to. If you select all then the policy will apply to any IP address on the
internet.