38
13. The ports field allows you to specify which port you wish to block from going out to the
internet. For example, you can type in port 80 and that would deny any traffic that is
using that port from going out to the internet.
14. You can also apply a schedule to this policy. You can set the start time and stop time.
You can also select which days you wish the policy to apply on. Click Apply towards the
bottom to finalize the settings.
15. You can block a device from completely accessing the internet. To do this, set the
Protocol to All and leave the Ports field blank.
SNMP
Simple Network Management Protocol (SNMP) is a standard protocol for network management. By default
it is enabled on the RK-1. To view the SNMP settings take the following steps.
To Next Page
Loading...
