23
2. For our example we will be forwarding traffic destined for the unknown network
(192.168.222.0/24) to the IP address of the Gateway device which has knowledge of
that network (192.168.1.111). First click Add New Item.
3. Target IP Address will be the network which must be accessed and is not directly known
by the RK-1 (192.168.222.0). Target Netmask is the Subnet Mask of that network
(255.255.255.0). Gateway is the IP Address traffic should be forwarded to in order to
reach that new network (192.168.1.111). An example of this would be the WAN IP
address of a second router connecting to the LAN of the RK-1. In order to reach the
second routers LAN a static route must be added to inform the RK-1 of the Gateway IP
that has direct knowledge of this new network. Zone should match the Network Zone of
the Gateway traffic will be forwarded to. Metric can optionally be changed to indicate
precedence between two similar routes. If the higher precedence route is not accessible
then the lower metric route will be taken.
To Next Page
Loading...
