21
4. Click Edit under any of the VLANs to view its settings. As an example, we will click Edit
under VLAN2.
5. The Name field allows you to change the name of the VLAN. By default VLAN2 will be
named Voice. The VLAN ID allows you to use a different VLAN ID. Enable Inter VLAN
Routing allows this VLAN to communicate with other VLANs. Unchecking this option would
give VLAN2 internet access only. VLAN 2 would not be able to communicate with any other
VLAN, and all other VLANs would not be able to communicate with VLAN2.
6. If you would like to change the IP address of VLAN2 you can enter the new IP in the IP
Address field. As an example, we will change the IP address of VLAN2 to 192.168.12.1.
To Next Page
Loading...
