Pakedge Device & Software RK-1 - Accessing the Router and Internet Connectivity

8
Determine what type of Internet connection you have from your Internet Service Provider
(ISP), and then follow one of the three instruction sets below to connect the router to the
Internet.
DHCP:
By default, the router will connect to the Internet using DHCP. If your ISP uses DHCP, you
may need to reset the modem to get Internet access. If you are using a modem that has a
router built into it, you may have to congure DMZ settings to allow complete functionality
of the RK-1.
Static IP:
To congure the router to a static IP, complete the following steps:
1. Hover your mouse towards the top of page to see the menu. Click on Network
Zones.