Pakon F-135 - Scanner Specifications; Minimum Host Computer Requirements; Power and Connectivity; Package Contents and Dimensions

Pakon Part#125307-B October 10, 2006 1
Scanner Specifications
Minimum Host Computer Specifications
• Pentium III or Athlon CPU, 700 MHz or higher, with MMX support
• 4GB of free hard drive space, capable of a sustained transfer rate of 30MB/sec. If IDE, it must
either be a Primary or Secondary Master drive or connected using a serial ATA connection.
• Windows 2000 and Windows XP
• 256 MB of RAM
• USB 2.0
• Screen resolution of 1024x768 or higher
Power
• External power supply
• 15V, 2.4 amps,
• 50-60 Hz Input voltage frequency
• Plug polarity is plus center, minus outside
• 5.5mm outer diameter, 2.5mm inner diameter
Contents of Box
• F-135 or F-135 Plus Film Scanner
• 6ft. USB 2.0 Cable
• Software and User Manual CD
• External power supply and power cord
Size
• 6.75” x 8.5” x 14.75” (H x W x D)
• 17.15cm x 21.6cm x 37.5cm (H x W x D)
Resolutions
The F-135 has two supported resolutions:
4Base 1000 x 1500
8Base 1500 x 2250
The F-135 Plus has three supported resolutions:
4Base 1000 x 1500
8Base 1500 x 2250
16Base 2000 x 3000