Palazzani
Palazzani Industrie spa
OM 386 pag 6 Cap 3
BATTERY CHARGES FOR RADIO-CONTROL
The radio-control has two batteries; while using the radio-control, one of them
charging. In this way it’s possible
to have always a charged battery
when necessary.
The battery charter is suitable
inside the right cover of the
machine (see the side pictures).
3.3 PLATFORM WORKING WITH DIESEL ENGINE
Platform is provided with 2 separate power; one of them is connected to the diesel
engine installed on the same platform.
Used for the truck downloading and for long transfers to reach the working site.
It can be used also for elevation working if the emissions gas are accepted (closed
sites, noise prohibition, etc.)
Thanks to the diesel engine adequate power, platform movements can be driven at
the best rated speed. (at least in respect to the motor at 220V)
Starting procedure:
• on main control desk (Fig. 3.2) rotate the key (item 8) on pos. 1 (oil and el.
tension warning lights)
• rotate the key on position 2 to start diesel engine.
• let the engine run some minuts (almost 5 min. with a ridig temperature)
before manoeuvring the platform
• due to the presence of a protecting timer, in case of engine stop, wait
almost 20 sec. before re-starting
• il motore è regolato tra 2000 g/1 ed a tale regime resterà durante la fase di
riposo; durante la traslazione del carro aumenterà il numero di giri
automaticamente.
To Next Page
Loading...