To Next PageTo Next Page
Need help?Do you have a question about the Palazzetti CT 14 and is the answer not in the manual?
General| Type | Pellet Boiler |
|---|---|
| Power | 14 kW |
| Hopper capacity | 60 kg |
| Dimensions (HxWxD) | 1200x600x800 mm |
| Flue diameter | 80 mm |
| Power supply | 230V / 50Hz |
| Power consumption | 100W |
| Fuel type | Pellets |
| Flue gas temperature | 120°C |
Explains symbols, intended use, and provides guidance on keeping the manual accessible.
Covers general information, updates, reference standards, and generalities related to the product.
Details product warranty, manufacturer liability, technical service, and spare parts information.
Information on the boiler's identification label and the process of boiler delivery.
Crucial safety advice for the installation process and personnel involved.
Safety guidelines for performing maintenance operations on the boiler.
Essential safety instructions for the end-user during boiler operation.
Details required pellet specifications, including diameter, length, moisture, and calorific value.
Guidelines for proper storage of pellets to maintain quality and prevent issues.
General guidelines for preparing the installation site for maximum efficiency and safety.
Safety measures and responsibilities for site preparation and installation work.
Minimum clearances required around the boiler for safety and access.
Specifies the need for adequate fresh air intake for boiler operation.
Guidelines for the proper installation of the flue gas exhaust system.
Rules for discharging flue gases through a traditional chimney.
Instructions for correctly levelling the boiler using adjustable feet.
Details electrical and other system connections required for the boiler.
Steps for setting up the boiler's initial operating configuration.
Description of the boiler's control panel components and status LEDs.
Instructions on navigating menus and using control panel buttons.
Explanation of how to set and adjust power and temperature parameters.
First step to fill the pellet hopper before appliance startup.
Instructions for connecting the boiler to the mains power supply.
Steps for setting language, date, time, and other initial parameters.
Procedure for igniting and starting the boiler.
How to change the boiler's operating parameters.
Correct procedure for turning off the boiler.
Explains operation with room thermostat, room probe, and storage tanks.
Setting up custom programs for automatic boiler on/off cycles.
Enables boiler to switch off at desired room temperature to save fuel.
Displays operating autonomy and how to inform the boiler about refilling pellets.
Boiler's automatic restart after power failure and keypad locking feature.
Sets a minimum temperature to prevent freezing.
Information on producing domestic hot water with specific models.
Essential safety steps before performing any maintenance tasks.
Regular cleaning tasks for the firebox, brazier, and ash bin.
Annual extraordinary maintenance performed by an authorized service center.
