cod. 004771850 - 10/2012 - Palazzetti - PN - Italy 31/140
ENGLISH
10 FUNCTIONS AVAILABLE 49
10.1 TIMER FUNCTION 49
10.2 “ECO MODE” SAVING FUNCTION 50
10.3 AUTONOMY FUNCTION 50
10.4 REFILL FUNCTION 50
10.5 RESTARTING AFTER A POWER FAILURE 50
10.6 “LOCK KEYPAD” FUNCTION 50
10.7 FROST PROTECTION FUNCTION 51
10.8 INTEGRATED PRODUCTION OF SANITARY HOT
WATER 51
11 ALARM MANAGEMENT 52
12 MAINTENANCE 53
12.1 SAFETY PRECAUTIONS 53
12.2 ROUTINE USER MAINTENANCE 53
12.3 SPECIAL MAINTENANCE 55
13 DECOMMISSIONING AND DISPOSAL 55
INDEX
1 INTRODUCTION 32
1.1 SYMBOLS 32
1.2 INTENDED USE 32
1.3 PURPOSE AND CONTENTS OF THIS MANUAL 32
1.4 HOW TO KEEP THIS MANUAL 32
1.5 UPDATES TO THE MANUAL 32
1.6 GENERAL INFORMATION 32
1.7 MAIN REFERENCE STANDARDS 33
1.8 PRODUCT WARRANTY 33
1.9 MANUFACTURER’S LIABILITY 33
1.10 INTENDED USERS 33
1.11 TECHNICAL SERVICE 33
1.12 SPARE PARTS 33
1.13 IDENTIFICATION LABEL 33
1.14 DELIVERY OF THE BOILER 33
2 SAFETY WARNINGS 34
2.1 INSTALLATION WARNINGS 34
2.2 MAINTENANCE WARNINGS 34
2.3 WARNING FOR THE USER 34
3 FUEL SPECIFICATIONS 35
3.1 FUEL SPECIFICATIONS 35
3.2 STORING THE PELLETS 35
4 HANDLING AND TRANSPORT 35
5 INSTALLATION SITE PREPARATION 36
5.1 GENERAL INFORMATION 36
5.2 SAFETY PRECAUTIONS 36
5.3 BOILER INSTALLATION SITE 36
5.4 COMBUSTION AIR 37
5.5 FLUE GAS EXHAUST 38
6 INSTALLATION 40
6.1 LEVELLING THE BOILER 40
6.2 SYSTEM CONNECTIONS 40
6.3 INITIAL CONFIGURATION 41
7 BOILER DESCRIPTION 43
7.1 CONTROL PANEL 43
7.2 USING THE CONTROL PANEL 44
7.3 OPERATING PARAMETERS 45
8 PRELIMINARY OPERATIONS 46
8.1 LOADING THE PELLETS 46
8.2 POWER SUPPLY 46
8.3 INITIAL SETTINGS 46
9 BOILER OPERATION 48
9.1 STARTING THE BOILER 48
9.2 MODIFYING THE PARAMETERS 48
9.3 SWITCHING OFF 48
9.4 OPERATION WITH ROOM THERMOSTAT 48
9.5 OPERATION WITH ROOM PROBE ON THE BOILER 48
9.6 OPERATION IN COMBINATION WITH A STORAGE
TANK 48
14 HYDRAULIC DIAGRAM 134
To Next Page
Loading...