LIFT GATE NOT LIFTING
30
MOTOR NOT RUNNING : Go to section in this manual on Motor Not Running
LIFT GATE NOT LOWERING
S-1 & S-2 VALVES ON LIFT CYLINDERS NOT OPENING (IF POWER
DOWN CHECK S5 VALVE OPENING AND MOTOR RUNNING)
LIFT GATE NOT LIFTING LOAD
FIRST, ADD 12 VOLT POWER SUPPLY DIRECT TO BATTERIES
SECOND, MOVE 12 VOLT POWER SUPPLY DIRECT TO MOTOR SOLENOID AND GROUND ON
MOTOR
ADJUST PSI TO 3000 PSI , 3400 PSI ON ILK/ ILQ 2200
CHANGE HYDRAULIC FLUID TO FLUID ISO 32
To Next Page
Loading...
