Need help?Do you have a question about the palintest Wagtech Potatest + and is the answer not in the manual?
General| Brand | palintest |
|---|---|
| Model | Wagtech Potatest + |
| Category | Test Equipment |
| Language | English |
Ensuring the kit and its components are clean and free from contamination for accurate testing.
Specific techniques to maintain sterility of kit components for microbiological analysis.
Detailed procedure for sterilizing the MFU using methanol for accurate results.
Methods for sterilizing aluminium petri dishes to ensure they are free from bacteria.
Steps for preparing petri dishes with absorbent pads for sample placement.
Using Media Measuring Devices (MMDs) to prepare culture media for microbiological tests.
Step-by-step guide to preparing culture media using MMDs and required water quality checks.
Procedures for collecting water samples using the MFU cup or alternative containers.
Detailed steps for filtering water samples using the Membrane Filtration Unit (MFU).
Specifying incubation duration and temperature for Total and Thermotolerant Coliforms.
Using the Potatest® + incubator for reliable Coliform results in field conditions.
Guide to setting up and operating the incubator, including mode selection.
Configuring incubator preferences such as User ID, Tests, Speaker, and Date Format.
Steps to select incubation settings, Sample ID, User ID, and start the cycle.
Final checks and procedures for starting and monitoring the incubation of samples.
Details of error codes for the Wagtech incubator and potential solutions.
Understanding how to count and interpret bacterial colonies for water quality analysis.
Step-by-step process for counting yellow colonies after incubation for Coliforms.
Details of error codes for the Wagtech incubator and potential solutions.
To Next Page