Chapter 7 Page 177
Note: You can set both Local and Modem settings and prepare
your Macintosh to synchronize using the HotSync cradle
or a modem. However, choosing both setups prevents
you from using either port for other operations such as
printing, faxing, or AppleTalk networking.
4. Close the HotSync Software Setup window.
Modem Setup
(continued)
■
Port.
Identifies the port that Palm Desktop
software uses to communicate with the
modem. Select the USB, modem or printer
port where you connected the modem
cable.
■
Modem Speaker.
Activates the modem’s
speaker. If you are having trouble
connecting, turn on this option to make
sure the modem connected to your
Macintosh is responding to incoming calls.
To Next Page
Loading...
