YOUR APPLICATION AND INFO MANAGEMENT TOOLS
BEAMING INFORMATION
182
9
CHAPTER
Te m p o r a r y : Enables Bluetooth devices
that are not on your Trusted Devices list
to request a connection with your
smartphone during the next two
minutes. Your smartphone reverts to
the Hidden setting and becomes
inaccessible to other devices after two
minutes.
4 Use the other device to discover your
smartphone and send information to it:
• See the other device’s documentation
to learn how to discover and send
information over a Bluetooth wireless
connection.
• If the Ringer switch is set to Sound
On, your smartphone beeps to notify
you of the connection and then
prompts you to accept the info. Select
a category or expansion card to file
the item(s). If you don’t select a
category, the item(s) goes into the
Unfiled category.
5 Select Ye s to receive the information or
No to refuse it.
Beaming information
Your smartphone is equipped with an IR
(infrared) port so that you can beam
information to another device with an IR
port—provided the other device supports
IR communications with Palm OS devices.
The IR port is located on the top of your
smartphone, next to the Ringer switch,
behind the small dark shield.
TIP
The Device Name in the Bluetooth app is
the name other devices with Bluetooth
wireless technology see when they connect
to your smartphone. The default name is the
name you gave your device during setup. You
can change this name if you want to.
DID
YOU
KNOW
?
When you receive an
application over a Bluetooth connection, you
can store the application on your smartphone
or send it to an expansion card inserted into
the expansion card slot.
To Next Page
Loading...
