14
GB
water washer in an area where there could be a danger of explosion is prohibited.
Do not inject water into materials containing asbestos or other harmful substances.
in order to avoid harm.
WATER PRESSURE WASHER FUNCTIONING (DIAGRAM C)
Its spray wand has two main settings. These settings can be changed when turning the nozzle’s adaptor found on the
end of the water wand outlet (6).
Turn the nozzle clockwise for a flat stream or in the opposite direction for a more concentrated stream.
Always be sure that the trigger is closed and the pressure water cleaner is disconnected before changing the nozzle
settings.
WORK DISTANCE BETWEEN THE NOZZLE AND THE OBJECT OR SURFACE TO CLEAN IS 30 CM.
IT MAY BE LESS IF REQUIRED FOR PATIOS OR MASONRY.
the wand’s trigger until the water begins to flow. Then activate the pressure water washer.
The pressure water washer stream is capable of carrying out the majority of the cleaning tasks for gardening or construction
but the use of detergent is advantageous when vehicles are cleaned or other paint finishing are carried out.
INSTRUCTIONS FOR DETERGENT USE (DIAGRAM E)
2. Remove the pistol’s safety.
3. Tighten the trigger to set the machine in operation.
4. Turn the start switch to the “I” on position.
CARE AND MAINTENANCE
WARNING
The high pressure hose connection is a very important part of the pressure water washer. Use the manufacturer
supplied hose and always try to connect it firmly to the washer. Also try to assemble the pistol wand in a safe manner.
immediately and it must be taken to the closest Authorized Technical Service.
The washer is equipped with a safety valve that frees pressure in case of overpressure in the circuit. In case this valve
replacement of its components. Repairs should be carried out only at the authorized Technical Service.
recommend carrying out regular maintenance in the following manner:
Then rinse with clean water on the outside.
IMPORTANT
Note that frost may damage your pressure washer if it has not been fully emptied of water after use. Always keep it in
a location protected from frost.
TROUBLESHOOTING
retail store or Authorized Technical Service to get help.
To Next Page
Loading...
