English
Operating time after a full charge
Approx.10minutes*
(When the water pressure level is set to 5)
* It varies with the ambient temperature and usage conditions.
About the charging reminder function
• If the battery is running low, the charge status indicator will start
ashing (once a second) during use and light off in 5 seconds after
turning off the power switch.
Displayconditionofthechargestatusindicator
Charging in progress Lights on
Charging complete Lights off
Charging abnormal
Flashing
(Flashing in red twice a second)
How to check if charging is completed
• After charging is completed, if you disconnect and then connect the
power supply, the charge status indicator will light on and then light off
in about 5 seconds.
Notes
• The charging time may differ when the appliance is used for the rst
time, or if it has not been used for more than 6 months. In addition,
the charge status indicator may not light on in the rst several minutes
of charging, but it will light on as the charging proceeds.
• The recommended ambient temperature for charging is 10 °C - 35 °C.
It may take longer to charge, or the charge status indicator will ash
rapidly and the battery may fail to charge properly in extremely high or
low temperatures.
• The battery will deteriorate if not used for over 6 months, so make
sure to perform a full charge at least once every 6 months.
How to use
1
Fillthewatertankwithwater.
a Open the water tank cap.
b Add water while keeping the main unit
level.
• Do not ll beyond the full-water
position.
c Close the water tank cap securely.
(When the full-water position is
reached, or when the water tank cap
is closed after the full-water position is
reached, a small amount of water may
ow out of the air vent.)
a
b
Full-water
position
If the water tank cap comes off
You can attach the water tank cap by following the procedure
below when it comes off.
2
Installthenozzle.
• Choose a nozzle for your purpose.
(See page 12.)
• Press in rmly until a "click" is heard.
Click
10
To Next Page
Loading...
