EasyManua.ls Logo

Panasonic AG-AC120EN - Caution for AC Mains Lead; EMC Notice for the Purchaser;User

Panasonic AG-AC120EN
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS
1. Applicable standards and operating environment
The apparatus is compliant with:
• standardsEN55103-1andEN55103-22009,and
• electromagneticenvironmentsE1,E2,E3andE4.
2. Pre-requisite conditions to achieving compliance with the above standards
<1> Peripheral equipment to be connected to the apparatus and special connecting cables
• Thepurchaser/userisurgedtouseonlyequipmentwhichhasbeenrecommendedbyusas
peripheralequipmenttobeconnectedtotheapparatus.
• Thepurchaser/userisurgedtouseonlytheconnectingcablesdescribedbelow.
<2>
For the connecting cables, use shielded cables which suit the intended purpose of the apparatus.
• Videosignalconnectingcables
Usedouble-shieldedcoaxialcables,whicharedesignedfor75-ohmtypehigh-frequencyap-
plications,forSDI(SerialDigitalInterface).
Coaxialcables,whicharedesignedfor75-ohmtypehigh-frequencyapplications,arerecom-
mendedforanalogvideosignals.
• Audiosignalconnectingcables
IfyourapparatussupportsAES/EBUserialdigitalaudiosignals,usecablesdesignedforAES/EBU.
Useshieldedcables,whichprovidequalityperformanceforhigh-frequencytransmissionap-
plications,foranalogaudiosignals.
• Otherconnectingcables(IEEE1394,USB)
Usedouble-shieldedcables,whichprovidequalityperformanceforhigh-frequencyapplica-
tions,asconnectingcables.
• WhenconnectingtotheDVIsignalterminal,useacablewithaferritecore.
• Ifyourapparatusissuppliedwithferritecore(s),theymustbeattachedoncable(s)following
instructionsinthismanual.
3. Performance level
Theperformanceleveloftheapparatusisequivalenttoorbetterthantheperformancelevel
requiredbythesestandards.
However,theapparatusmaybeadverselyaffectedbyinterferenceifitisbeingusedinanEMC
environment,suchasanareawherestrongelectromagneticfieldsaregenerated(bythepresence
ofsignaltransmissiontowers,cellularphones,etc.).Inordertominimizetheadverseeffectsofthe
interferenceontheapparatusincaseslikethis,itisrecommendedthatthefollowingstepsbetaken
withtheapparatusbeingaffectedandwithitsoperatingenvironment:
1.Placetheapparatusatadistancefromthesourceoftheinterference.
2.Changethedirectionoftheapparatus.
3.Changetheconnectionmethodusedfortheapparatus.
4.
Connecttheapparatustoanotherpoweroutletwherethepowerisnotsharedbyanyotherappliances.
CautionforACMainsLead
AC adaptor (Battery charger)
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This product is equipped with 2 types of AC mains cable, Type C and Type BF.
Appropriatemainscablemustbeusedineachlocalarea,sincetheothertypeofmainscableis
notsuitable.
TYPE C TYPE BF
indicatessafetyinformation.

Related product manuals