Panasonic AG-DV2500P - Page 107

No. Item Ref. Illustration Procedure
2-11
1
Insert a point
of the Idler arm
2
Rotate the Idler arm to the clockwise direction.
(Check the Idler arm moves smoothly.)
3
Install the Emergency gear into
the Idler cover and push it lightly.
1
Hook to the
shaft of the
Main deck.
4
Hook to the
shaft of the
Main deck.
2
Fit to the boss of
the Main deck.
5
Fit to the
boss of the
Main deck.
3
Rotate the Emergency gear with screw drive
then fit the gear of the Idler arm and the Reel
Motor gear.
Caution : When install the Idler arm assembly
into the main deck, if the gear of the
Idler arm and Reel Motor gear does
not fit, these geare may damaged.
7
!
Idler arm assembly
<Disassembly>
1)Remove the two screws (S2) and remove the idler
cover.
2)Remove the idler arm.
3)Remove the emergency gear.
4)Remove the spring (P2).
<Assembly>
1)Attach the Idler arm and the Emergency gear into
the Idler cover.
Fig. 2.6.7
(
S2
)
(
S2
)
(
P2
)
Emergency gear
Idler arm
Idler cover
2)Attach the Idler arm assembly onto the Main deck.