Panasonic AG-DV2500P - Page 149

3-22
Measuring Measuring point (
*
)
No. Item instruments & Mode Adjustment parts (
-
) Adjustment procedure
Input signals
Adjustment level (
+
)
42 PAL LINE IN
EE Y level
adjustment
WFM (PAL) or
oscilloscope
LINE IN
PAL 100% color
bar
EE
ADJUST
MENU, 273.
LE EE Y LEV
(PAL)
(1)Set the INPUT SELECT SW to LINE or Y/C.
(2)Select ADJUST MENU No. 273, "LE EE Y LEV
(PAL)".
(3)Adjust so that the level from the pedes-
tal to 100% WHITE is as specified.
(4)Press the [SET] button to store the adjustment
data.
*
Y OUT (Y/C jack) (75 !
terminated)
- [PLAY] and [STOP]
buttons
+ 700 mVp-p
43 PAL LINE IN
EE C level
adjustment
WFM (PAL) or
oscilloscope
LINE IN
PAL 100% color
bar
EE
ADJUST
MENU, 274.
LE EE C LEV
(PAL)
(1)Set the INPUT SELECT SW to LINE or Y/C.
(2)Select ADJUST MENU No. 274, "LE EE C LEV
(PAL)".
(3)Adjust so that the burst levels are as speci-
fied.
(4)Press the [SET] button to store the adjustment
data.
*
C OUT (Y/C jack) (75 !
terminated)
- [PLAY] and [STOP]
buttons
+ 300 mVp-p
44 On-screen
display
position
adjustment
Monitor TV Color
bar (built-in
signal)
EE
ADJUST
MENU, 200
OSD ADJ
(1)Set the INPUT SELECT SW to LINE or Y/C.
(2)Select ADJUST MENU No. 200, "OSD ADJ".
(3)Adjust so that the boundary between the Red
and Blue color bars comes in the space be-
tween "4" on the second position from the right
of the array of figures on the bottom of the
screen and "3" on the third position.
(4)Press the [SET] button to store the adjustment
data.
*
LINE OUT or Y/C OUT
(75 ! terminated)
- [PLAY] and [STOP]
buttons
+ Between “3” and “4”
Ⳳ 1/5 character
(3) On-screen display adjustment
700mVp-p
300mVp-p
456789012345
Red Blue
Adjust so that the boundary between
the Red and Blue color bars comes in
the space between "4" and "3".