51
OO
OO
tt
tt
hh
hh
ee
ee
rr
rr
ss
ss
5151
Before Requesting Repair (Problems and Solutions)
Playback (Sound)
1: Sound is not played back from the built-in
speaker of the Camera Recorder or the
headphones.
OIs the volume too low? During playback, keep
pressing the [PUSH] Dial until the [VOLUME]
Indication appears. Then, turn the [PUSH] Dial
to adjust the volume. (-32-)
2: Different sounds are reproduced at the same
time.
O[12bit AUDIO] on the [PLAYBACK FUNCTIONS]
Sub-Menu of the [VCR FUNCTIONS] Main-
Menu has been set to [MIX]. As a result, the
original sound and sound that was recorded by
audio dubbing are played back together. It is
possible to reproduce the sounds separately.
(-38-)
3: The original sound was erased when audio
dubbing was performed.
OIf you perform audio dubbing on a recording
done in [16bit] Mode, the original sound will be
erased. If you wish to preserve the original
sound, be sure to select [12bit] Mode at the time
of recording.
4: Sounds cannot be played back.
OAlthough a Cassette with no audio dubbing is
being played, is [12bit AUDIO] on the
[PLAYBACK FUNCTIONS] Sub-Menu of the
[VCR FUNCTIONS] Main-Menu set to [ST2]?
To play back a Cassette with no audio dubbing,
[12bit AUDIO] must be set to [ST1]. (-38-)
OIs the Variable Speed Search Function working?
Press the [1] Button to cancel the Variable
Speed Search Function. (-33-)
To Next Page
Loading...
