Panasonic AG-TL950 - 4-7 Contents of Menu Switches

23
4-7 Contents of Menu Switches
4 ON-SCREEN/MENU SWITCHES
[ ]: Factory setting • The lower section in the items and set values columns shows what’s on the VCR’s display.
Screens Items Set values Function
ON TONE 0
SCREEN 30
MODE 70
[100]
0
30
70
100
The higher the numeric value, the brighter the display.
The brightness is shown on the line under the setting value.
0 : ********** (black indication)
30 : ***
70 : *******
100 : ********** (white indication)
POWER [ON]
LOSS CNT OFF
ON
OFF
O5D 1
DATE [ON]
OFF
ON
OFF
Sets whether or not the year, month and day are shown on screen.
ON: Shown.
OFF: Not shown.
O5D 2
TIME [ON]
OFF
ON
OFF
Sets whether or not the time is shown.
ON: Shown.
OFF: Not shown.
O5D 3
Sets whether or not the recording speed mode is shown on screen.
ON: Shown.
OFF: Not shown.
T-MODE ON
[OFF]
ON
OFF
O5D 4
ALARM CNT ON
[OFF]
ON
OFF
Sets whether or not the number of alarms is shown on screen.
ON: Shown.
OFF: Not shown.
O5D 5
O5D 6
FRONT REC TALLY [ON]
DISPLAY OFF
ON
OFF
FDiP 1
Sets whether or not a warning indication (error code display) is shown
when a problem occurs.
ON: Shown.
OFF: Not shown.
Sets whether or not the [REC] indicator lights in the Record mode.
ON: Lights.
OFF: Does not light .
Sets whether or not the number of power losses is shown on screen.
ON: Shown.
OFF: Not shown.
WARNING [ON]
OFF
ON
OFF
(VCR's display)
FDiP 2
Selects the picture quality in the Play mode.
OFF: Normal picture quality.
ON: Enhanced detail reproduction. However, the S/N ratio is degraded.
ViD 1
ViD 2
VIDEO MODE IN [LINE]
S-VIDEO
LiN
5
DETAIL [OFF]
ON
OFF
ON
Selects input video signals.
LINE: Inputs composite video signals from the rear panel’s [VIDEO IN]
connector.
S-VIDEO: Inputs separate Y/C video signals from the rear panel’s
[S-VIDEO] connector.