Panasonic AJ-D215P - Page 12

– 12 –
5
Audio input selector (MIC SELECT) switches
These switches are used to select the CH1 and
CH2 audio input.
FRONT: Set to this position when recording audio
signals from the microphone
incorporated in the camera.
REAR: Set to this position when connecting
external microphones to the audio input
connectors (XLR 3P) on the rear panel
and recording the audio signals from
these microphones.
7
ITEM button
This is used to select menu items. When the
:
MENU switch is at OFF, it functions as the reset
button for the CTL counter.
8
DOWN and UP buttons
These are used to make changes to the menu
settings.
9
PAGE button
This is used to set the menu items.
:
MENU SET/OFF selector switch
SET: Set to this position when displaying or
making changes to menu items.
OFF: The switch is normally kept at this
position.
MIC SELECT
CH2
CH1
REAR
FRONT
AUDIO LEVELCH 1 CH 2
MENU
OFF
SET
ITEM
CTL RESET
DOWN UP PAGE
10
0
10
0
8
6 5 6
: 7 9
6
Audio level controls
These are used to adjust the CH1 and CH2
recording levels.