Diopter control
Adjusting the viewfinder diopter
1
Set the POWER switch to ON.
2
Turn the diopter control and adjust it so that the viewfinder image can
be seen clearly.
An image now appears on the viewfinder.
Adjusting the viewfinder’s brightness and contrast
1
Set the POWER switch to ON.
2
Set the OUTPUT switch to CAM.
An image now appears on the viewfinder.
3
Turn the viewfinder’s BRIGHT and CONTRAST controls and adjust
the brightness and contrast of the image.
When the viewfinder’s PEAKING control is turned, the image can be
adjusted to be softer or sharper.
If it is adjusted to be sharp, it will be easier to focus the lens.