203
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Appendix
8
Menus
For user
Select menus and determine settings according to the system
available in the household� All initial settings must be done by an
authorised dealer or a specialist� It is recommended that all alterations
of the initial settings are also done by an authorised dealer or a
specialist�
•After initial installation, you may manually adjust the settings�
•The initial setting remains active until the user changes it�
•The Remote Controller can be used for multiple installations�
•Ensure the operation indicator is OFF before setting�
•The system may not work properly if set wrongly�
Please consult an authorised dealer�
To display <Main Menu>:
To select menu:
To conrm the selected content:
After the initial settings have been completed, you can select a quick menu from the following options and edit the setting�
1
Press
to display the quick menu.
Force DHW Powerful Quiet Force Heater
Weekly Timer Force Defrost Error Reset R/C Lock
2
Use
to select menu.
3
Press
to turn on/off the select menu.
Quick Menu
Menu Default Setting Setting Options / Display
1 Function setup
1.1
Weekly timer
Once the weekly timer is set up,
User can edit from Quick Menu�
To set up to 6 patterns of
operation on a daily basis�
•Disabled if Heat-Cool SW is
select “Yes” or if Force Heater
is on�
Timer setup
Select day of the week and
set the patterns needed
(Time / Operation ON/OFF / Mode)
Timer copy
Select day of the week
To Next Page
Loading...
